Naviga SWZ: Home Page » News
News del 14 Aprile 09 Autore: Gianplugged

* Added: A ´Note´ to the box that pops up at the start of a burn when the LB in the settings doesn´t match the one in the DVD/MDS file - basically it tells you to put the setting back on ´Calculate Optimal´.
* Added: Support for one more Lite-On device identifier (´ATAPI iHES´) - used when automatically changing the book type etc.
* Added: Ability to select the size of the format when multiple options are available. ´Preferred´ uses the ´Number Of Blocks´ value from the first descriptor in the list for a given format type, ´Minimum´ and ´Maximum´ should be pretty obvious!
* Added: New log entries showing the status of options (enabled/disabled etc) that have an effect on what happens during an erase operation.
* Added: The user can now choose if they want to perform full certification or not (the opposite being ´Quick Certification´ !) when full erasing BD-RE via the New option ´Prefer Format With Full Certification´. Previously the program always requested full certification - i.e. where the drive tests all the sectors and maps out any bad ones.
* Added: Detailed ´Write Speed´ descriptor information to the bottom of the disc information text.
* Added: Option to never delete audio files when deleting files (having been told to!) after a burn/verify. This makes it safer for people burning audio discs via the ´Create CD CUE File´ feature.
* Added: The ability to create *.DVD files (a plain text and basic alternative to .MDS files) via the same basic interface used to create the *.MDS ones.
* Added: ´Content Type´ field to the image details box that pops up when you use build mode. (´DVD Video´, ´BD Video´, ´Data´ etc)
* Added: ´Shut Down´ shutdown action that calls the ´ExitWindowsEx´ API with the ´EWX_SHUTDOWN´ flag. This might work to shut down and turn off the PC for some users where ´EWX_POWEROFF´ fails to do so.
* Added: More debug code to the exclusive access locking / unlocking functions.
* Added: Options to control build mode prompts for including ADV_OBJ and CERTIFICATE folders when they´re present but not in the source list.
* Added: Ability to ignore the reported file system on remote drives - so the program doesn´t then force the 4GB file splitting limit on anything (possibly incorrectly) reported to be using FAT/FAT32.
* Added: Options to do with (not) prompting for confirmation of HVDVD_TS / BDMV content in Build mode.
* Added: Options to do with (not) prompting for confirmation of correcting DVD Video / HD DVD Video / BD Video / DivX Video / OS Install Disc settings in Build mode.
* Added: The option to have Read and Build modes write out an MD5 file when they´re done (assuming ImgBurn has been told to calculate the MD5 values in the first place).
* Added: The program now remembers if the Log windows was minimised / maximised when it was closed and restores it accordingly when opened again.
* Added: The Main and Log windows now snap to the centre of the screen vertically too, rather than just horizontally.
* Added/Changed: The program will once again (by default) update the GUI with any proposed setting changes it detects are required when you´re building a disc. A new option ´Proposed Setting Changes - Update GUI´ can be used to toggle this on/off.
* Added/Changed: The program will now examine the write speed descriptors to find a match with whatever the user selected (i.e. ´8x´) and use the values from it (if one is found) when setting the write speed.
* Changed: Split the BD-RE full erase (with ´Prefer Properly Formatted Discs´ enabled) up into the drive controlled operation and the program controlled operation (where ImgBurn zeroes out all the sectors).
* Changed: When doing a full erase on BD-RE, the program will no longer try a slightly different command unless the previous one wasn´t supported - i.e. a failure during the erase (due to a dodgy disc) will no longer make it try again with a slightly different command.
* Changed: The disc capacity is now shown in the disc information text even when the disc is said to be ´empty´, so long as the disc status is ´complete´.
* Changed: The ´Turn Off´ action is now known as ´Power Off´ to match the actual flag (´EWX_POWEROFF´) used in the ´ExitWindowsEX´ API.
* Changed/Fixed: The program will now only replace the selected boot image with the ´isolinuxisolinux.bin´ file (and patch it) if the two point to the same file on your hdd.
* Changed/Fixed: You were unable to use ´Change Folder´ (found on the context menu) when in Build mode if the destination box didn´t include a file name.
* Fixed: An issue when sorting the Write Speed descriptors into ascending order.
* Fixed: Typo in ´For best result, burn single layer DVDs at 8x or 12x.´ status bar message - should have said ´results´ (with an ´s´ !).
* Fixed: Maximising the log window causes the main window to get lost / hidden behind it - now it jumps back to the front.
* Fixed: If the application is minimised to the taskbar (or system tray) when the log is maximised, the log window covers/hides the main window when it´s restored again.
* Fixed: Bug where the wrong CRC was STILL being calculated for the isolinux.bin file´s boot information table!
* Fixed: Bug where the selected folder (when coming from the change folder/recent folder menu) was being added to the recent files list.
* Fixed: Bug where the selected file was not being added to the recent files list.
* Fixed: A bug in the new function that zeros out unused buffer space which then messed up any ´GET PERFORMANCE´ command (the one used to get the supported write speeds).

1 - Commento/i sul Forum


Categoria: Windows

Licenza: Free

Dimensioni: 1.95 MB

OS: Windows

La Community di

La community con le risposte che cerchi ! Partecipa é gratis !
Iscrizione ForumIscriviti al Forum


Vuoi ricevere tutti gli aggiornamenti di SWZone direttamente via mail ?
Iscrizione NewsletterIscriviti alla Newsletter