Bios vari (18-11-03)

Naviga SWZ: Home Page » News
News del 18 Novembre 03 Autore: Canaro
N.B. Si raccomanda di controllare attentamente che la versione del bios sia quella corretta per la propria scheda madre e di aggiornarlo solo se necessario


(jak updatovat BIOS)

  • AI7 BIOS verze 1.4
    • Please use flash utility AWDFLASH v8.24F to update AI7 BIOS.
    • Add Pentium 4 Extreme Edition support.
    • Disable Winbond W83627HF sensor unit to prevent incorrect CPU voltage information shown in some third party software.
    • Fixed the problem that BIOS will show the string"AGP/PCI Frequency is 66/33MHz" twice after worm boot.
    • Fixed the problem that certain CD/DVD-ROM could not be correctly detected when there is a HDD drive attached on the same IDE cable.
    • Fixed the problem that system will reboot when the"Resume by Alarm" is enabled and user pressed power button to shutdown the system during POST.
    • Fixed the problem that IDE devices cannot be detected correctly if TAB and DEL is pressed at the same time when entering the BIOS setup .
    • Fixed HDD size detected as 136GB when 200/250/300 GB SATA drives are connected to SATA1 or SATA2 (ICH5 SATA channels).
    • Enhance system performance.
    • BIOS compile date: 11/10/2003.
  • AN7 BIOS verze 1.2
    • First release.
  • BD7 BIOS verze EA
    • Update CPU micro code.
    • Add new options 80C/85C/90C in "CPU Shutdown Temperature".
    • Change the default setting of "CPU Warning Temperature" to 85C.
  • BD7-RAID BIOS verze EA
    • Update CPU micro code.
    • Add new options 80C/85C/90C in "CPU Shutdown Temperature".
    • Change the default setting of "CPU Warning Temperature" to 85C.
  • BE7 BIOS verze E7
    • Update CPU micro code.
    • Add new options 80C/85C/90C in "CPU Shutdown Temperature".
    • Change the default setting of "CPU Warning Temperature" to 85C.
  • BE7-RAID BIOS verze E7
    • Update CPU micro code.
    • Add new options 80C/85C/90C in "CPU Shutdown Temperature".
    • Change the default setting of "CPU Warning Temperature" to 85C.
  • BE7-B BIOS verze 1.2
    • Update CPU micro code.
    • Add new options 80C/85C/90C in "CPU Shutdown Temperature".
    • Change the default setting of "CPU Warning Temperature" to 85C.
  • BE7-G BIOS verze 1.2
    • Update CPU micro code.
    • Add new options 80C/85C/90C in "CPU Shutdown Temperature".
    • Change the default setting of "CPU Warning Temperature" to 85C.
  • BE7-S BIOS verze 1.2
    • Update CPU micro code.
    • Add new options 80C/85C/90C in "CPU Shutdown Temperature".
    • Change the default setting of "CPU Warning Temperature" to 85C.
  • DiGiDice (IS50) BIOS verze 1.5
    • Please use flash utility AWDFLASH v8.24F to update IS-50 BIOS; The motherboard has BIOS write-protect function enabled. Please setup BIOS protect control to "Unprotected" in Advanced BIOS Feature in BIOS if you would like to update the BIOS.
    • Update CPU micro code.
    • Add Pentium 4 Extreme Edition support.
    • Remove "An Energy Star Ally" string at boot up.
    • Fixed the missing Intel brand name during boot up after changing the CPU or clearing CMOS.
    • Hide the OnBoard VGA options when AGP card is installed.
    • Revise DMI information.
    • Fixed the memory sizing string error in the DMI information when the system is operating at dual channel mode.
  • IS7 BIOS verze 1.7
    • Update CPU micro code.
    • Add Pentium 4 Extreme Edition support.
    • Fixed the problem that CAS latency can not be set manually when the CPU:DRAM is set to PSB8000/5:4 or PSB800/3:2.
    • Fixed the problem that the hard disk will not be recognized if the OnChip SATA is set to "Combined Mode" then choose "RAID".
    • Fixed the problem that system will reboot when the "Resume by Alarm" is enabled and user pressed power button to shutdown the system during POST.
    • Fixed HDD size detected as 136GB when 200/250/300 GB SATA drives are connected to SATA1 or SATA2 (ICH5 SATA channels).
  • IS7-E BIOS verze 1.7
    • Update CPU micro code.
    • Add Pentium 4 Extreme Edition support.
    • Fixed the problem that CAS latency can not be set manually when the CPU:DRAM is set to PSB8000/5:4 or PSB800/3:2.
    • Fixed the problem that the hard disk will not be recognized if the OnChip SATA is set to "Combined Mode" then choose "RAID".
    • Fixed the problem that system will reboot when the "Resume by Alarm" is enabled and user pressed power button to shutdown the system during POST.
    • Fixed HDD size detected as 136GB when 200/250/300 GB SATA drives are connected to SATA1 or SATA2 (ICH5 SATA channels).
  • IS7-G BIOS verze 1.7
    • Update CPU micro code.
    • Add Pentium 4 Extreme Edition support.
    • Fixed the problem that CAS latency can not be set manually when the CPU:DRAM is set to PSB8000/5:4 or PSB800/3:2.
    • Fixed the problem that the hard disk will not be recognized if the OnChip SATA is set to "Combined Mode" then choose "RAID".
    • Fixed the problem that system will reboot when the "Resume by Alarm" is enabled and user pressed power button to shutdown the system during POST.
    • Fixed HDD size detected as 136GB when 200/250/300 GB SATA drives are connected to SATA1 or SATA2 (ICH5 SATA channels).
  • IS7-M BIOS verze 1.1
    • Update CPU micro code.
    • Add Pentium 4 Extreme Edition support.
    • Fixed the problem that CAS latency can not be set manually when the CPU:DRAM is set to PSB8000/5:4 or PSB800/3:2.
    • Fixed the problem that the system fails the diagnose test of Intel 865G Graphics Controller Diagnostic Utility.
    • Fixed the problem that the system will hang at starting PXE if the OnChip SATA is set to enhanced mode and the LAN boot is enabled.
    • Add the message of how to enter BIOS setup in the full screen logo.
    • Changed the option wordings of "Boot Device" from "ZIP100" to"ZIP100/250" and from "USB-ZIP" to "USB-ZIP/LS120".
    • Revised the wording of memory status from "DDR at Bank" to "DDR at DIMM" in system configuration table.
    • Fixed the problem that system will reboot when the "Resume by Alarm" is enabled and user pressed power button to shutdown the system during POST.
    • Fixed HDD size detected as 136GB when 200/250/300 GB SATA drives are connected to SATA1 or SATA2 (ICH5 SATA channels).
    • Update VGA BIOS to version V3062.
  • IS7-V BIOS verze 1.2
    • Update CPU micro code.
    • Add Pentium 4 Extreme Edition support.
    • Fixed the problem that CAS latency can not be set manually when the CPU:DRAM is set to PSB8000/5:4 or PSB800/3:2.
    • Fixed the problem that system will reboot when the "Resume by Alarm" is enabled and user pressed power button to shutdown the system during POST.
    • Fixed HDD size detected as 136GB when 200/250/300 GB SATA drives are connected to SATA1 or SATA2 (ICH5 SATA channels).
  • IT7-MAX2 2.0 BIOS verze E6
    • TUpdate CPU micro code.
    • Add new options 80C/85C/90C in "CPU Shutdown Temperature".
    • Change the default setting of "CPU Warning Temperature" to 85C.
  • KV8-MAX3 BIOS verze 1.6
    • Please use flash utility AWDFLASH v8.24F to update KV8-MAX3 BIOS.
    • Fixed un-expected warning beeps in certain circumstances
      • Change the Vcore low limit in ABIT EQ.
      • Restart Windows
      • Get into BIOS setup page and then exit.
    • Synchronize the CPU Fan Fail Shutdown function with ABIT EQ.
    • Reserve IRQ 12/14/15/9 for Mouse/IDEchannel0/IDEchannel1/ACPI in the "PnP/PCI Configuration".
    • Fixed the problem that the system will go into STR mode automatically if
      • The system is waked from STR by "BIOS RTC Alarm Wake Up".
      • The system stays idle for several minutes.
    • Fixed the problem that the AGP and DDR voltage will be incorrect if
      • User loaded "Setup Default".
      • Save and Exit without entering the SoftMenu first.
    • Fixed the problem that the "Memory Hole" function is not functioning.
    • Set the default DDR voltage to 2.6V if the memory is operating at DDR400.
    • Synchronize the Fan EQ function with ABIT EQ.
    • Fixed the incorrect CPU voltage shown in the DMI data.
    • Disable Winbond W83627HF sensor unit to prevent incorrect CPU voltage information shown in some third party software.
    • Change AGP mode item to Auto/4X/2X/1X if AGP 2.0 card is installed and to Auto/4X/8X if AGP 3.0 card is installed.
  • VI7 BIOS verze 1.3
    • Please use flash utility AWDFLASH v8.24F to update VI7 BIOS.
    • Add PIRQ 4~7 in the "PnP/PCI Configuration".
    • Fixed the problem that Windows schedule task cannot wake the system up if the RTC alarm is enabled.
    • Fixed the problem that the system cannot boot into Windows if
      • The OS is installed in the SATA hard disk when both the SATA and PATA hard disks are present
      • The PATA hard disk is removed after the OS installation.
    • Enhanced "Fan Fail Shutdown" function.
    • Fixed wording problem in the "Time Alarm" function.
    • Reserved IRQ9 for ACPI in the "PnP/PCI Configuration".
  • VI7 BIOS verze 1.5
    • Please use flash utility AWDFLASH v8.24F to update VI7 BIOS.
    • Add new option "DDR DQS & DQ Output Delay" to enhance the compatibility of DDR400 and faster memory modules. The default setting is listed below and it should fit most of memory modules; however, if there is any memory instability, users could manually adjust the setting values.
      • DQS Output Delay: 2B
      • DQ Output Delay:2C
    • For DDR200/266/333 memories, above settings are automatically optimized and hidden.


(jak updatovat BIOS)

  • KX600 BIOS verze 1.06
    • Support new Duron FSB =266 (Applebred) CPU.
    • Modify 'DDR Voltage (Volt)' value string to "2.65, 2.70, 2.75, 2.80 ".
  • KX600 Pro BIOS verze 1.06
    • Support new Duron FSB =266 (Applebred) CPU.
    • Modify 'DDR Voltage (Volt)' value string to "2.65, 2.70, 2.75, 2.80 ".

  • AK77-400 Max BIOS verze R1.07 Windows | DOS
    • Changed Promise PDC20375 SATA150 Option ROM From "R1.00.0.22" to "R1.00.0.33"
    • Modified supported VGA nVidia MX440(4x,8x)¡BMX420¡BFX5200 PCI Cards to entry WinXP.
    • Modified "Clock Spread Spectrum" in "Frequency/Voltage Control" Page default value from "Enabled" to "Disabled"
    • Added supported "AMD Duron(tm) 1400MHz" FSB133 CPU.
    • Modified "5VSB(V)" in "Silent BIOS/HW Monitor" Page to more exactly.
    • Modified hang on "C1" while power on with ¡uXP3000+/FSB333 CPU¡v+¡uDDR333*3¡v
    • Updated EzWinFlash.
    • Fixed Multimedia Device is disappeared on BIOS Post 2nd page.
  • AK79D-400 Max BIOS verze R1.05 Windows | DOS
    • Supports new Duron 133 L2 64K CPU.
    • Remove the "IDE DMA Transfer access" item ,because this item will cause some HDD copy file error.
    • Updated the SATA promise firmware 1.0.00.33.
  • AX4SPB-UN BIOS verze R1.03 Windows | DOS
    • Fixed sometimes system will hang at C1 when booting.
    • Added the help of "Advanced BIOS Features"Removable Device Priority.
    • Updated some MicroCodes
    • Updated codes for memory ref. code 1.4
    • Fixed Boot Led keep blinking even the POST finished.
  • AX4SPE-UL BIOS verze R1.03 Windows | DOS
    • Fixed sometimes system will hang at C1 when booting.
    • Added the help of "Advanced BIOS Features"Removable Device Priority.
    • Updated some MicroCodes
    • Updated codes for memory ref. code 1.4
    • Fixed Boot Led keep blinking even the POST finished.


(jak updatovat BIOS)

  • K7S8XE+ BIOS verze 1.4
    • Over Vcore Voltage in the BIOS setup should work correctly.
  • P4VT8 BIOS verze 1.2
    • When Windows 98SE installed on single SATA HDD, SATA driver should be installed correctly from support CD.
    • USB keyboard or mouse should work when resume from Windows OS with USB Legacy Support is enabled in the BIOS setup.
    • Bootable USB-FDD should be able to boot up when it is the only bootable device installed and "try Other Boot Devices" is set to "Yes".


(ASUS Update, jak updatovat BIOS v DOSu)




(jak updatovat BIOS - WinFlash, Award, AMI)

  • 755-A BIOS verze 1.0b
    • Improve DRAM capability.
  • 865PE-A BIOS verze 1.0
    • First Release.
  • AF1 BIOS verze 1.0c
    • Add AMD solution
  • AF1 Deluxe BIOS verze 1.0c
    • Add AMD solution
  • AF1 Lite BIOS verze 1.0c
    • Add AMD solution
  • K7SOM+ BIOS verze 031105
    • Adding AMD CPU naming rule
  • KV1 Deluxe BIOS verze 1.0
    • First Release.


(jak updatovat BIOS)

  • EP-4PDA BIOS verze 04.11.2003
    • Remove "USB-ZIP" item in booting device priority menu. ("USB-ZIP" item has been combined with "USB-HDD" in the menu.)
    • Show Pentium4 Processor - Extreme Edition, and its L3 cache size and string.
    • Shorten the time of power-on.
    • Patch the failure of reset caused from ALC655 Codec AcLink.
  • EP-4PDA3I BIOS verze 04.11.2003
    • Remove "USB-ZIP" item in booting device priority menu. ("USB-ZIP" item has been combined with "USB-HDD" in the menu.)
    • Show Pentium4 Processor - Extreme Edition, and its L3 cache size and string.
    • Shorten the time of power-on.
    • Patch the failure of reset caused from ALC655 Codec AcLink.
  • EP-4PDAEI BIOS verze 04.11.2003
    • Remove "USB-ZIP" item in booting device priority menu. ("USB-ZIP" item has been combined with "USB-HDD" in the menu.)
    • Show Pentium4 Processor - Extreme Edition, and its L3 cache size and string.
    • Shorten the time of power-on.
    • Patch the failure of reset caused from ALC655 Codec AcLink.
  • EP-4PDAI BIOS verze 04.11.2003
    • Remove "USB-ZIP" item in booting device priority menu. ("USB-ZIP" item has been combined with "USB-HDD" in the menu.)
    • Show Pentium4 Processor - Extreme Edition, and its L3 cache size and string.
    • Shorten the time of power-on.
    • Patch the failure of reset caused from ALC655 Codec AcLink.
  • EP-4PGF BIOS verze 04.11.2003
    • Remove "USB-ZIP" item in booting device priority menu. ("USB-ZIP" item has been combined with "USB-HDD" in the menu.)
    • Show Pentium4 Processor - Extreme Edition, and its L3 cache size and string.
    • Shorten the time of power-on.
  • EP-4PLAI BIOS verze 06.11.2003
    • Remove "USB-ZIP" item in booting device priority menu. ("USB-ZIP" item has been combined with "USB-HDD" in the menu.)
    • Show Pentium4 Processor - Extreme Edition, and its L3 cache size and string.
    • Shorten the time of power-on.
    • Patch the failure of reset caused from ALC655 Codec AcLink.
    • Shorten the time of detecting IDE devices.
  • EP-8K3A BIOS verze 16.09.2003
    • Show AppleBred CPU's type on screen.
  • EP-8K3A+ BIOS verze 16.09.2003
    • Show AppleBred CPU's type on screen.
  • EP-8K3AP BIOS verze 16.09.2003
    • Show AppleBred CPU's type on screen.
  • EP-8K5A2 BIOS verze 16.09.2003
    • Show AppleBred CPU's type on screen.
  • EP-8K5A2N BIOS verze 16.09.2003
    • Show AppleBred CPU's type on screen.
  • EP-8K5A2+ BIOS verze 16.09.2003
    • Show AppleBred CPU's type on screen.
  • EP-8K5A3+ BIOS verze 16.09.2003
    • Show AppleBred CPU's type on screen.
  • EP-8KHA+ BIOS verze 16.09.2003
    • Show AppleBred CPU's type on screen.
  • EP-8KRA2+ BIOS verze 28.10.2003
    • Support new function [HDD S.M.A.R.T. Capability], and the default is set Disable.
    • To show AGP/PCI frequency.
    • Set [AGP Aperture Size] default at 128MB to increase system's stability.
    • Fix the system hangs when CMOS checksum error and at POST C1h.
    • Recognize Barton and Thorton CPU correctly.
    • Modify AppleBred CPU information shows incorrectly under Windows.
    • Update VIA 6420 SATA adapter ROM version to V2.20.
    • Patch "SATA HDD" item is missing in the booting priority menu when HPT is enabled.
  • EP-8KRA2I BIOS verze 28.10.2003
    • Support new function [HDD S.M.A.R.T. Capability], and the default is set Disable.
    • To show AGP/PCI frequency.
    • Set [AGP Aperture Size] default at 128MB to increase system's stability.
    • Fix the system hangs when CMOS checksum error and at POST C1h.
    • Recognize Barton and Thorton CPU correctly.
    • Modify AppleBred CPU information shows incorrectly under Windows.
    • Update VIA 6420 SATA adapter ROM version to V2.20.
    • Patch "SATA HDD" item is missing in the booting priority menu when HPT is enabled.
  • EP-P4MKI BIOS verze 04.11.2003
    • Solve the system hangs when running Photoshop V7.01.
    • Update Intel Micro code.
      • [CPU: 0F24(h) → ID:1E(h)]
      • [CPU: 0F25(h) → ID:15(h)]
      • [CPU: 0F27(h) → ID:37(h)]
      • [CPU: 0F29(h) → ID:17(h)]


(jak updatovat BIOS)

  • GA-7N400 BIOS verze F6
    • Fix windows XP show unknow device in device management for 294 to 297
  • GA-7N400-L BIOS verze F6
    • Fix windows 98 show unknow device in device management for 294
  • GA-8I875 BIOS verze F4
    • Support intel Prescott and P4Extreme family CPU
    • Fixed CDROM can't boot issue
  • GA-8I875 Ultra BIOS verze F4
    • Support intel Prescott and P4Extreme family CPU
    • Fixed CDROM can't boot issue
  • GA-8IG1000 Pro (Rev 2.0) BIOS verze FE
    • Support intel Prescott and P4Extreme family CPU
    • Fixed CDROM can't boot issue
  • GA-8IK1100 (Rev 2.0) BIOS verze FC
    • Support intel Prescott and P4Extreme family CPU
    • Fixed CDROM can't boot issue
  • GA-8KNXP (Rev 2.0) BIOS verze FD
    • Support intel Prescott and P4Extreme family CPU
    • Fixed CDROM can't boot issue
  • GA-8KNXP Ultra (Rev 2.0) BIOS verze FC
    • Support intel Prescott and P4Extreme family CPU
    • Fixed CDROM can't boot issue
  • GA-8SIMLH-P (Rev 4.0) BIOS verze FA
    • For 8SIMLH V4.0
  • GA-8VM533 BIOS verze F3
    • Fixed Onboard LAN always can be wake up even set PME setup item to disabled


(jak updatovat BIOS - pomocí Intel Express nebo Iflash)

  • D848PMB BIOS verze P09 Iflash | Intel Express
    • Fixed issue where system will not boot to PXE when using Specific AGP Card.
    • Added BIOS support for alternate FWH flash part
    • Fixed issue with load Custom Default after CMOS Corruption when using alternate FWH flash part.
    • Updated Setup not to display unsupported memory slots and Zone- 2 temperature for MB and PR boards.
    • Updated Audio ssids for MB and PR boards.
  • D865GVHZ BIOS verze P11 Iflash | Intel Express
    • Add support for alternate firmware hub flash part.
    • Fixed an issue where system will not boot to PXE when certain AGP cards are present.


(jak updatovat BIOS - Award, AMI)

  • 865G Neo2 Series BIOS verze 1.9
    • Improve system stability
  • 865G Neo2-LS BIOS verze 1.9
    • Improve system stability
  • 865PE Neo2 Series BIOS verze 1.9
    • Improve system stability
  • 865PE Neo2-FIS2R BIOS verze 1.9
    • Improve system stability
  • 865PE Neo2-LS BIOS verze 1.9
    • Improve system stability
  • K7N2 (MS-6570) BIOS verze 3.9
    • Support Nvidia System Utility
  • K7N2 Delta-ILSR BIOS verze 7.5
    • Support Duron Applebred FSB133 CPU
  • K7N2 Delta-ILSR BIOS verze 7.6
    • Support Nvidia System Utility
  • K7N2 Delta-L BIOS verze 5.6
    • Support Nvidia System Utility
  • K7N2G-ILSR BIOS verze 1.8
    • Support Nvidia System Utility
  • K7N2G-L BIOS verze 3.9
    • Support Nvidia System Utility



(jak updatovat BIOS)

  • SY-CK8 DRAGON Plus BIOS verze 2AA1
  • SY-KT600 DRAGON Plus BIOS verze 2BA1
    • Fix compatibility issue with S-ATA on windows 98SE.


(jak updatovat BIOS)

  • Thunder i7501 (S2720-533) BIOS verze 2.01
    • Support for 1M L3 cache (latest Intel microcode)
    • Resolves 'power on after power fail' power on issue
    • Compiled using AMI's latest 8.0 source code
    • Add Adaptec 4.20 SCSI Firmware
  • Thunder i7501 Pro (S2721-533) BIOS verze 2.01
    • Support for 1M L3 cache (latest Intel microcode)
    • Resolves 'power on after power fail' power on issue
    • Compiled using AMI's latest 8.0 source code
    • Add Adaptec 4.20 SCSI Firmware
  • Thunder i7501 Xtreme (S2726) BIOS verze 2.01
    • Support for 1M L3 cache (latest Intel microcode)
    • Resolves 'power on after power fail' power on issue
    • Compiled using AMI's latest 8.0 source code
    • Add Adaptec 4.20 SCSI Firmware
fonte PCtuning
Inserisci un commento sul forum Commenta la News sul Forum

Voto:

Categoria: Driver e BIOS

La Community di SWZone.it

La community con le risposte che cerchi ! Partecipa é gratis !
Iscrizione ForumIscriviti al Forum

Newsletter

Vuoi ricevere tutti gli aggiornamenti di SWZone direttamente via mail ?
Iscrizione NewsletterIscriviti alla Newsletter

NOTIZIE CORRELATE