BIOS Vari 15-03-2006

Naviga SWZ: Home Page » News
News del 15 Marzo 06 Autore: Vlad
N.B. Si raccomanda di controllare attentamente che la versione del bios sia quella corretta per il proprio modello e di aggiornarlo solo se necessario fonte pctuning.cz


(jak updatovat BIOS)

  • NI8-SLI GR BIOS version 1.3
    • Supprt Presler/ Cedar Mill CPU
    • POST screen now show correctly when ATI X1300 VGA card installed
  • NI8-SLI BIOS version 1.3
    • Supprt Presler/ Cedar Mill CPU
    • POST screen now show correctly when ATI X1300 VGA card installed
  • KV-85 BIOS version 1.2
    • Enhanced compatibility with certain memories
  • AW8 BIOS version 1.6
    • Enhanced compatibility with certain DDR2-667 memories 
    • POST screen now show correctly when ATI X1300 VGA card installed
  • AN8-3rd EYE BIOS version 2.0
    • Support FX-60 
    • Enhanced compatibility with certain memories 
    • Enhanced compatibility with certain USB devices
  • Fatal1ty AN8 SLI BIOS version 2.0
    • Support FX-60
    • Enhanced compatibility with certain memories
    • Enhanced compatibility with certain USB devices
  • AA8-DuraMAX BIOS version 2.5
    • POST screen now show correctly when ATI X1300 VGA card installed
  • AV8-3rd EYE BIOS version 2.6
    • Enhanced compatibility with certain VGA cards
    • Enhanced compatibility with certain PCI SCSI cards
    • Added new CPU support
  • AN8 BIOS version 2.0
    • Enhanced compatibility with certain USB devices
    • Support FX-60
    • Enhanced compatibility with certain memories
  • Fatal1ty AN8 BIOS version 2.0
    • Support FX-60
    • Enhanced compatibility with certain USB devices
    • Enhanced compatibility with certain memories
  • AN8 Ultra BIOS version 2.0
    • Support FX-60 
    • Enhanced compatibility with certain USB devices
    • Enhanced compatibility with certain memories
  • AN8 SLI BIOS version 2.0
    • Support FX-60
    • Enhanced compatibility with certain USB devices
    • Enhanced compatibility with certain memories
  • AA8-3rd EYE BIOS version 2.5
    • POST screen now show correctly when ATI X1300 VGA card installed
  • AA8XE-3rd EYE BIOS version 2.5
    • POST screen now show correctly when ATI X1300 VGA card installed
  • AW8-MAX BIOS version 2.5
    • Enhanced compatibility with certain DDR2-667 memories 
    • POST screen now show correctly when ATI X1300 VGA card installed
    • Update CPU micro code
  • AG8 BIOS version 2.5
    • POST screen now show correctly when ATI X1300 VGA card installed
    • Update CPU micro code
  • AG8-V BIOS version 2.5 
    • POST screen now show correctly when ATI X1300 VGA card installed 
    • Update CPU micro code
  • AG8-3rd Eye BIOS version 2.5
    • POST screen now show correctly when ATI X1300 VGA card installed
    • Update CPU micro code
  • AA8XE BIOS version 2.5
    • The POST screen now show correctly when ATI X1300 VGA card installed


(jak updatovat BIOS, návod v PDF)

  • PX915-DV version R1.02
    • With PX915P-2V compatible
  • P4M800-775 version R1.02
    • Supports Celeron D(336) 2,8GHz CPU
  • KM51PV version R1.02
    • Improved compatibility between SATA & IDE hard drive
  • K8M800-754 version R1.04
    • Improved SATA/IDE performance
  • PX865PEC PRO v2.0 version R2.01
    • Improved SATA/IDE performance

  • EX661-T BIOS version R1.09
    • Fixed System Properties" show error CPU frequency under Windows XP when use 775 P4 which have EIST features 
    • Added and updated New Micro Code for Prescott CPU
    • Fixed system will be crushed ,resume from s3 used the SATA hard drive
    • Updated the SSID/SVID for the WHQL test
    • Updated the new VGA ROM to support 1440x900 resolution
    • Note: Please have your SiS VGA driver updated to version R3.69 as well
  • EZ661-T BIOS version R1.09
    • Fixed System Properties" show error CPU frequency under Windows XP when use 775 P4 which have EIST features
    • Added and updated New Micro Code for Prescott CPU
    • Fixed system will be crushed ,resume from s3 used the SATA hard drive
    • Updated the SSID/SVID for the WHQL test
    • Updated the new VGA ROM to support 1440x900 resolution
    • Note: Please have your SiS VGA driver updated to version R3.69 as well
  • nCK804a-LFS BIOS version R1.03a Beta
    • SupportAMD Athlon FX-60 processored
  • EX65-II BIOS version R1.07
    • Imporoved PCI compatbility.
  • EZ65-II BIOS version R1.07
    • Imporoved PCI compatbility.
  • MZ855-II BIOS version R1.05a Beta
    • Beta BIOS for the incompatibility with Matrox graphic card G550
    • !!! Do not use if u don't have this issue
    • Please also install the latest driver from Matrox.
  • EY855-II BIOS version R1.05a Beta
    • Beta BIOS for the incompatibility with Matrox graphic card G550 
    • !!! Do not use if u don't have this issue
    • Please also install the latest driver from Matrox.
  • EY855 BIOS version R1.05a Beta
    • Beta BIOS for the incompatibility with Matrox graphic card G550
    • !!! Do not use if u don't have this issue
    • Please also install the latest driver from Matrox.
  • EZ855 BIOS version R1.05a Beta
    • Beta BIOS for the incompatibility with Matrox graphic card G550
    • !!! Do not use if u don't have this issue
    • Please also install the latest driver from Matrox.


(jak updatovat BIOS)

  • K8NF4G-SATA2 BIOS version 1.60
    • Modify FID/VID programming routine.
  • 939Dual-SATA2 BIOS version 1.60
    • Add one item "AGP P2P Deep Fifo" in BIOS setting
  • P4V88+ BIOS version 1.70
    • CPU Microcode updated.(Celeron D350, P4-PSC 3.4Ghz G1 stepping(0F49) CPU supported)
  • P4VM800 BIOS version 1.50
    • CPU Microcode updated.(Celeron D350, P4-PSC 3.4Ghz G1 stepping(0F49) CPU supported)
  • P4Dual-880Pro BIOS version 1.40
    • CPU Microcode updated.(Celeron D350, P4-PSC 3.4Ghz G1 stepping(0F49) CPU supported)
  • P4i45GV BIOS version 3.40
    • CPU Microcode updated.(Celeron D350, P4-PSC 3.4Ghz G1 stepping(0F49) CPU supported)
  • P4i65GV BIOS version 2.10
    • CPU Microcode updated.(Celeron D350, P4-PSC 3.4Ghz G1 stepping(0F49) CPU supported)
  • P4Dual-915GL BIOS version 1.40
    • CPU Microcode updated.(Celeron D350, P4-PSC 3.4Ghz G1 stepping(0F49) CPU supported)
  • P4i65PE BIOS version 1.30
    • CPU Microcode updated.(Celeron D350, P4-PSC 3.4Ghz G1 stepping(0F49) CPU supported)
  • P4i65PE-M BIOS version 1.20
    • CPU Microcode updated.(Celeron D350, P4-PSC 3.4Ghz G1 stepping(0F49) CPU supported)


(ASUS Update 6.09.01, jak updatovat BIOS)

Final

Beta

  • A8N-SLI Premium Beta BIOS version 1011.006
    • Latest beta BIOS.
  • A8N-SLI Deluxe beta BIOS version 1017.004
    • Latest beta BIOS


(jak updatovat BIOS)

  • iDEQ N1 BIOS version 06.02.20  with | without bootup Biostar splash screen
    • Update BIOS code
  • iDEQ C1 BIOS version 06.03.10 with | without bootup Biostar splash screen
    • Update BIOS code to set CPU fan default to smart
  • 915G-M7 Ultra BIOS version 05.12.20 with | without bootup Biostar splash screen
    • To.Support P4-775 6xx series CPU
  • 915GL-M7 Ultra BIOS version 05.12.20 with | without bootup Biostar splash screen
    • Update BIOS to support CPU Smart Fan function.
  • 915GL-A7 PCI-ED BIOS version 05.12.20 with | without bootup Biostar splash screen
    • Update BIOS to support CPU Smart Fan function.
  • K8T800-A7A BIOS version 06.02.06 with | without bootup Biostar splash screen
    • Modify BIOS to enable onboard LAN
  • I915-A7 BIOS version 05.12.20 with | without bootup Biostar splash screen
    • To add CPU Smart FAN fun
  • NF4 4X-A7 BIOS version 05.12.20
    • When use 2 Intel LAN PCI Card, the system can't enter BIOS Setup after reboot
  • NF4ST-A9 BIOS version 05.12.20
    • Fix the problem of Overclock selectable not match with real frequency
  • GeForce 6100 - M7 BIOS version 05.12.20 with | without bootup Biostar splash screen
    • Change default setting of Init display first item to PCI slot
    • Fixed PS2 mouse detecting failed if PS2 Keyboard wasn't plugged in
  • GeForce 6100 - M9 BIOS version 05.12.20 with | without bootup Biostar splash screen
    • Change default setting of Init display first item to PCI slot
    • Fixed PS2 mouse detecting failed if PS2 Keyboard wasn't plugged in
  • P4M80-M4 BIOS version 05.12.21 with | without bootup Biostar splash screen
    • To Support aobve 136G HDD's capacity
  • P4M800-M7A v7.0 BIOS version 05.11.24 with | without bootup Biostar splash screen
    • To Support aobve 136G HDD's capacity
  • K8T890-A7(K8T89-A7) version 05.12.20 with | without bootup Biostar splash screen
    • To fix the system can't recognize 80G Seagate SATA2 HDD
  • K8T890-A9(K8T89-A9) version 05.12.20 with | without bootup Biostar splash screen
    • 1.80G Seagate SATA2 can't be recognized
    • To add CPU String for FX60 CPU
  • K8M800-M7A BIOS version 05.12.20 with | without bootup Biostar splash screen
    • The system unable to detect Seagate SATA2 HDD


(jak updatovat BIOS)

  • EP-8GF6100-M version 06.02.21
    • Changed: Boot title name to "GeForce6100 + nForce4
    • Modified: Overclock function to improve performance
  • EP-8HEAI BIOS version 05.12.06
    • To accelerate power on timing when used AGP VGA card.
  • EP-8NPAJ BIOS version 05.11.10
    • Update CPU code
  • EP-8NPA SLi BIOS version 05.12.02
    • Added 'DRAM bank Interleaving' and 'Burst Length' item
    • Solved can't write flash from old bin file to new bin file in F71872F I/O
  • EP-8NPA7I BIOS version 06.02.27
    • Added: 'Burst Length' and 'DRAM Bank Interleaving' item:
    • Fixed: System hang at POST 29H after reset from Windows XP SP2 if Cool'n'Quiet enabled
  • EP-9HEAI BIOS version 05.12.29
    • To accelerate power on timing when used AGP VGA card
  • EP-5LWAJ BIOS version 06.01.12
    • To sloved the full screen logo color palette not correct
    • Change model name in DMI
  • EP-5LAI BIOS version 05.10.21
    • Fixed SATA only enabled in Primary mode
  • EP-9NPA Ultra BIOS version 06.01.03
    • To sloved the full screen logo color palette not correct
  • EP-9NPA+ Ultra BIOS version 06.01.03
    • To sloved the full screen logo color palette not correct
  • EP-9NPAJ BIOS version 06.01.03
    • To sloved the full screen logo color palette not correct
  • EP-8NDA71 BIOS version 05.11.10
    • Solved some USB flash can't boot
    • Solved Cool&Quiet control function select disable but BIOS can't disable Cool&Quiet
    • Update CPU code
  • EP-9NPA+ SLi BIOS version 05.11.22
    • Update CPU code support FX-60
    • Fixed boot block code overwrite
    • Added Speical I/O and USB park mode item
  • EP-5EDAI BIOS version 06.01.18
    • Solved "F75133S_TURBO" function fail after S3 resume
    • Solved hang at post 25h when plug creative SB0460
    • Modify RealTek ALC880 Pin Widget Verb-table to solved CD-in fail
    • Patch ICS 954552 clock new chip not comportable
  • EP-9NDA3UI BIOS version 05.11.07
    • Solve Vdimm Voltage was seted to max voltage from default voltage in a short time,it will return default value
    • Solve CPU use rate always in high used rate,after S3 resume
    • Sove some USB flash can't boot
    • Support CPU ratio can adjust X.5
    • Patch SDA3400 K8 939 CPU can't boot
    • Solve Matrox 550 can't install driver
  • EP-8HDAI PRO BIOS version 05.11.03
    • Update CPU code
  • EP-5NVA+ SLi BIOS version 05.11.24
    • Added RealTek ALC880 table for WHQL test
    • Solved ATAPI device boot fail in boot block
    • Update NVMM to 4.053.13 from 4.052.12.
    • Adjust SATA driving for SATA EYE PATTERN test
  • EP-9NPAJ SLi BIOS version 05.11.22
    • Update CPU code support FX-60
    • Fixed boot block code overwrite
    • Added Speical I/O and USB park mode item
  • EP-8NPA7I BIOS version 05.11.07
    • Update CPU code
    • Vdimm adjust check
    • Added Speical I/O and USB park mode item
    • Fixed SM bus has error after install driver in OS
  • EP-8KDA3I BIOS version 05.11.10
    • Solved some USB flash can't boot
    • Solved Cool&Quiet control function select disable but BIOS can't disable Cool&Quiet
    • Update CPU code
  • EP-9NPA+ BIOS version 06.01.03
    • o sloved the full screen logo color palette not correct
  • EP-9NPA3J BIOS version 05.11.22
    • Update CPU code support FX-60
    • Fixed boot block code overwrite
    • Added Speical I/O and USB park mode item
    • Added Cool'n'Quiet support for new version CPU ADA3200DKA4CG/ADA3500DKA4CG(down code)
  • EP-9NPA3 SLi BIOS version 05.11.22
    • Update CPU code support FX-60
    • Fixed boot block code overwrite
    • Added Speical I/O and USB park mode item
  • EP-NVA SLi BIOS version 05.11.24
    • Added: RealTek ALC880 table for WHQL test
    • Solved: ATAPI device boot fail in boot block
    • Updated: NVMM to 4.053.13 from 4.052.12
    • Adjusted: SATA driving for SATA EYE PATTERN test


(jak updatovat BIOS - pomocí Intel Express nebo Iflash)

  •  D975XB BIOS version 0442 Express | Iflash
    • TFixed issue where fan settings were not being programmed correctly. 
    •  Added support for duplicating SLP string to multiple locations with a single BIOS. 
    • Fixed issue where Intel® Viiv™ Technology badge was not properly displayed. 
    • Added Serial Port enable/disable setup question. 
    • Fixed issue where system would not wake from S4 via PCI/PCIe devices when ACPI Suspend State set to S1. 
    •  Fix for Intel® Integrator Toolkit issue. 
    •  Fixed issue where Default Modules were not getting loaded upon Iflash /md switch.  Added Flex Language Module Support. 
    •  Fixed issue where system could not enter sleep states after previously waking using a PCI Express device. 
    •  Fixed issue where serial ports would stop functioning after call to INT14 Function 04 (Extended COM Port Initialize).
  • D945PLRN BIOS version 0065 Express | Iflash
    • Added new audio SSID. 
    • Fixed issue where Default Modules were not getting loaded upon Iflash “/md” switch.
  • D945PWM BIOS version 0065 Express | Iflash
    • Added new audio SSID.
    • Fixed issue where Default Modules were not getting loaded upon Iflash “/md” switc
  • D945GRW BIOS version 0067
    • Fixed fan register in manufacturing mode. 
    •  Moved “Zip Emulation Type” from AdvancedUSB Configuration to Boot menu.
    • PWN 1 Config - PWM Frequency 30Khz to 25Khz PWN 2 Config - PWM Frequency 25Khz to 11hz PWN 3 Config - PWM Frequency 25Khz to 11hz Zone 1 Config - TRange 10 to 6.67; Spike Smoothing Enabled set to 4.4 sec Zone 2 Config - TLimit 55 to 85° C; Spike Smoothing Enabled set to 4.4 sec Zone 3 Config - TLimit 55 to 45° C; Spike Smoothing Enabled set to 4.4 sec  Rear Fan only controlled from Remote 2. 
    •  Added support for certain DVD drives to boot OS installation CD. 
    •  Add TPM function.
    •  Add RAID Option ROM.
  • D945GBO BIOS version 3592 Express | Iflash
    • Fixed issue where TPM did not get disabled after clearing TPM. 
    • Fixed failure where system would hang after flash update with certain processor. 
    •  Modified AMT Type 130 SMBIOS structure to display correct ‘$AMT’ signature field.  Fixed issue where USB mice would not work with option ROMs and DOS applications that take direct hardware control of IRQ12 and the 8042 keyboard controller without using BIOS INT15 C2xx mouse functions. 
    •  Fixed issue where USB 2.0 speed was not working under BIOS USB legacy support.  Modified Setup to always hide the HPET setup question. 
    •  Defined Intel® AMT Type 130 SMBIOS structure. 
    •  Fixed no-remote-text-during-first SOL/IDE-R boot. 
    •  Changed displayed SOL copyright to 2006. 
    •  Corrected value for AMT(R) IANA number.
  • D945GPM BIOS version 3592 Express | Iflash
    • Fixed issue where TPM did not get disabled after clearing TPM. 
    • Fixed failure where system would hang after flash update with certain processor.
    • Modified AMT Type 130 SMBIOS structure to display correct ‘$AMT’ signature field. 
    • Fixed issue where USB mice would not work with option ROMs and DOS applications that take direct hardware control of IRQ12 and the 8042 keyboard controller without using BIOS INT15 C2xx mouse functions.
    • Fixed issue where USB 2.0 speed was not working under BIOS USB legacy support.  Modified Setup to always hide the HPET setup question.
    • Defined Intel® AMT Type 130 SMBIOS structure.
    • Fixed no-remote-text-during-first SOL/IDE-R boot.
    • Changed displayed SOL copyright to 2006. 
    • Corrected value for AMT(R) IANA number.
  • D915GOM BIOS version 0412 Express | Iflash
    • Fixed issue where Memtest* v1.65 failed when some USB devices are connected.
  • D101GGC BIOS version 0306
    • Fixed when after MFG mode and aging suspend S4.System cannot boot to OS normally. 
    •  Add program clock gen code for hardware request. 
    •  Fixed run modbin6 stack overflow. 
    •  Updated processor support. 
    •  Fixed press any key will issue IRQ1 two times when USB controller disable.
    •  Fixed DDR un-support CAS Latency 4 clocks. 
    •  Support show each DRAM info in memory configuration group. 
    •  Modify Wake on LAN from S5 Item value to "Stay off" and "Power on".
    •  Follow Intel BIOS spec1.0 show HDD info in Drive Configuration. 
    •  Reorder Advanced screen each group order.
    •  Support switch logo to text feature by pressing TAB key.
    •  Modify ACPI Suspend State item value to "S1 State" and "S3 State".
    •  Modify Memory Configuration Group item string. 
    •  Follow Intel BIOS spec modify hardware monitor string and order. 
    •  Fixed OSB logo color error on ATI VGA card.


(jak updatovat BIOS)

  • DK88 BIOS version 1.30
  • H2107 BIOS version 1.30
  • DH800 BIOS version 1.40


(jak updatovat BIOS)

  • MP-P6VM-A BIOS version M06
    • Solve BIOS report wrong memory size in DMI structures
  • MP-P6V-A BIOS version M04
    • change VIA RAID/SATA ROM
  • MP-P6VM-X BIOS version M06
    • Update CPU Micro Codes
  • MP-K8NGM BIOS version M02
    • Support Rev:E6 cool'n'quiet.
  • MP-K8N Combo BIOS version M04
    • Support 754 Rev:E6 CPU.
    • Support 939 FX60 CPU.
    • Solution use ATI 1x00 series full logo screen color issue.
    • NV Raid boot rom update to V5.50
  • MP-K8N GT4-X BIOS version M07
    • Support Rev:E6 CPU cool'n'quiet.
    • Fix SATA mode error in bootscreen
  • MP-K8N-GT4 BIOS version M04
    • Support FX60 CPU
    • Fix use ATI 1X00 series card when show full logo color error
    • Show SATA current mode in boot screen
  • MP-K8N-GT4 Ultra BIOS version M04
    • Support FX60 CPU
    • Fix use ATI 1X00 series card when show full logo color error
    • Show SATA current mode in boot screen


(jak updatovat BIOS - Award, AMI)

  • MSI K8T Neo2 Series version 9.3
    • Update CPU ID
    • Fixed system will auto resume from S1 under Windows98 & WindowsME.
  • MSI K8N Diamond BIOS version 1.9
    • Support "Cool'n'Quiet" function under Windows 2000. 
    • Update CPU ID.
  • MSI RD480 Neo 2 BIOS version 3.2
    • Fixed system cannot detect SATA HDD after resume from S4.
  • MSI K8N SLI Platinum BIOS version 3.9
    • Support "Cool'n'Quiet" function under Windows 2000
    • Update CPU ID

  • A31G BIOS version 1.1


(jak updatovat BIOS)

  • P5I815P BIOS version 2.0 06-01-24
    • fixed power/reset/ S1/S3/S4 any problem
    • delete PC Health any Item

  • SK21G version s108
    • Added Auto detect boot device" menu item
  • SS56L version s01s
    • Update product message for driver autorun
  • SS56G version s01s
    • Update product message for driver autorun
  • SN95G5 version s1xd
    • Support AMD FX60 CPU
  • SN95G5 V2 version s2xd
    • Support AMD FX60 CPU
  • SN21G5 version s10v
    • Support AMD FX60 CPU
  • SD211G5 version s00j
    • Fixed "Terratec Cinergy2400iDT" TV tuner card compatibility issue
  • SN26P version s00x
    • Patch Areca raid card can't be detected 
    • Support AMD FX60 CPU
  • SN955G5 V3 version s3xc
    • Support AMD FX60 CPU
  • SN25P BIOS version s028
    • Support AMD FX60 CPU
  • ST20GP BIOS version s01a
    • Support AMD FX60 CPU
    • Update Cool'N'Quiet PST table


(jak updatovat BIOS)

  • PDSML-LN2 / PDSML-LN1 BIOS version R1.0 zip | exe
  • PDSMA / PDSMi BIOS version R1.1 zip | exe
  • PDSMi-LN4 BIOS version R1.1 zip | exe
  • X6DA3-G2 / X6DAi-G2 BIOS version R2.0 zip | exe
  • X6DVA-4G2 / X6DVA/EG2 BIOS version R1.0c zip | exe
  • PDSMi BIOS version R2.0 zip | exe
  • X6DHR-3G2 / X6DHR-EG2 BIOS version R2.0 zip | exe
  • X6DHR-C8 BIOS version R2.0 zip | exe
  • X6DH3-G2 / X6DHi-G2 BIOS version R2.0 zip | exe


(jak updatovat BIOS)

Final

  • Tomcat K8E v3.01
    • Updated AMD PowerNOW! Support
    • Added RAID 5 support
    • Added bios option for PCI Latency Timer
    • Added Console Redirect Hot-Key (Esc + Esc) to enable BIOS BBS popup menu functions
    • Adjusted CPU temperature readings
  • TOMCAT K7M (S2498) V1.07
    • Fixed an issue where you can't power off automatically in Fedora Core 3.
    • Updated the RAID Option ROM to support more mass storage HD's
    • Fixed an issue where trying to reboot remotely would fail
    • Fixed an issue where some linux distributions would fail the installation when using a RAID array
  • THUNDER i7520R/i7520RD  BIOS V1.05
    • Solved an expansion ROM error message for PCI slot 5
    • Fixed a system configruation error when using 5 Visiowave cards
    • Updated the Console Redirect keys so that the ESC key  will allow entrance to the boot menu
    • Added an error message for keyboard not being detected during POST
    • Updated a LSI SCSI card support issue
    • Solved an Expansion ROM size limitation issue 
    • Fixed an issue for a LSI MegaRAID card and the  m2044 riser card during a Linux installation
    • Updated CPU micro coding
    • Added SMDC M3291 support
    • Added an option to change the default PCI-X bus  speed for the PXH0 bus to the bios
  • THUNDER i7520/i7520D  BIOS V1.05
    • Solved an expansion ROM error message for PCI slot 5
    • Fixed a system configruation error when using 5 Visiowave cards
    • Updated the Console Redirect keys so that the ESC key  will allow entrance to the boot menu
    • Added an error message for keyboard not being detected during POST
    • Updated a LSI SCSI card support issue
    • Solved an Expansion ROM size limitation issue
    • Fixed an issue for a LSI MegaRAID card and the  m2044 riser card during a Linux installation
    • Updated CPU micro coding
    • Added SMDC M3291 support
  • Tomcat i7230B BIOS version 1.01
    • Updated CPU support
    • Added the ability to [Enable/Disable] the embedded VGA
    • Fixed an issue where the system will power on immediately
         after a shutdown from DOS
    • Updated the PXH PCI mode frequency settings
    • Changed the C1 Enhandced mode setting to [Enabled]
         by default
  • Thunder K8QS PRO BIOS version V.E105
    • Updated memory speed detection issue
    • Fixed an issue when the F2 key was pressed strange characters would show up on the screen 
    • Added AMD PowerNOW! functions and set default BIOS setting to [Disabled]
    • Updated the hardware monitoring 
    • Updated Operton Dual Core CPU cache reporting
    • Added a bios option to choose between PCI or embedded VGA chipset 
    • Added a feature to support Keyboard Error reporting to be [Enable/Disable] in the BIOS
  • Thunder K8QSD PRO BIOS version V.E105
    • Updated memory speed detection issue
    • Fixed an issue when the F2 key was pressed strange characters would show up on the screen
    • Added AMD PowerNOW! functions and set default BIOS setting to [Disabled]
    • Updated the hardware monitoring
    • Updated Operton Dual Core CPU cache reporting
    • Added a bios option to choose between PCI or embedded VGA chipset 
    • Added a feature to support Keyboard Error reporting to be [Enable/Disable] in the BIOS

Beta

  • Tiger K8W BIOS version 3.02c
    • Patched Silicon Image 3114 RAID driver to resovle WinXP 64-bit installation issues
    • Updated AMD PowerNOW! support
    • Implemented AMD's recommendations for DDR400 speed settings when large loads were used at once
    • Changed default PowerNow setting to be [Disabled] 
    • Fixed an issue where Console Redirect would hang during use
    • Updated the CPU microcoding
  • Thunder K8SRE BIOS version 2.01s
    • Updated nVidia SATA RAID firmware to v5.53.07
    • Memory clock adjustment is possible now to fix the cmos checksum issue
    • Memory clock auto-downgrade has been optimizied to fit all the 2G modules
    • Setting timing to 2T and disable bank interleave when 4 Rank dimm present
    • Fixed an issue where the LAN's would not show up during  a cold boot
    • WHQL PCI complaincy test pass by update the ACPI  MCFG table
    • 40/80 pin detection added, now 40 pin cable will be limited at UDMA mode 2
    • Add rf IPMI Boot option support (*Boot to PXE support and Boot to BIOS support)
    • Updated 8254 IO interrupt override setting in MPtable
    • BIOS will perform ADT intialization whether BMC is present or not
    • Fixed the BCM LAN yellow mark issue by upgrating IOAPIC bar address to match the new cpu feats
    • Add unreported IO into motherboard resource when BMC present for WHQL testing
    • Using Tcae as the auto fan control input
    • Added nVidia nForce RAID 5 support
  • Thunder K8SE BIOS version 2.00d
    • Fixed M7902 Option ROM initialize fails if an IntelFixed M7902 Option ROM initialize fails if an Intel Quad-Port Lan adapter is present
    • Updated CPU Temp reporting
    • Modify AutoFAN function terperature range ( 40'C ~ 60'C )
    • Added BIOS setup item:  Onboard BCM(5704) LAN [Enable]/[Disabled]
    • Added WatchDog function .
    • Added AMD Dualcore 285 CPU support 
    • Updated the nVidia Raid firmware to v5.50 for additional RAID 5 support
3 - Commento/i sul Forum

Voto:

Categoria: Driver e BIOS

La Community di SWZone.it

La community con le risposte che cerchi ! Partecipa é gratis !
Iscrizione ForumIscriviti al Forum

Newsletter

Vuoi ricevere tutti gli aggiornamenti di SWZone direttamente via mail ?
Iscrizione NewsletterIscriviti alla Newsletter

NOTIZIE CORRELATE